The Shock & Vibe acts as suspension for your handlebars. The Quad's frame moves up and down and pitches left to right while the bars are suspended by the Shock & Vibe Clamp. This gives the feel, from the rider's perspective, that the bars are not moving, but are staying parallel to the course.Without the bars being jerked, the quad's movement is felt in the foot-pegs as the quad kicks left to right. This allows the rider to keep balance and position over the quad by just lifting a leg as the peg rises. The Shock & Vibe System can be used with most stock or after market stems. Our tests indicate a reduction of vibration to the handlebars of over 300% compared to an Anti-Vibe stem alone. The system can be used in conjunction with an antivibe stem for an even greater reduction of vibration. Adjusting the spring preload is as easy as adding or removing shims from the preload cap. The Shock & Vibe System is available for Fat Bars (1 1/8”) or Standard bars (7/8”). Cross bars, if used, must be removable. The S/V System utilizes the control gained by having a solid bar in your hands. Not for use with Fasst Flexxbars or Softbars. The S/V System replaces your old handlebar clamps and in many cases there is zero weight gain. By using the S/V system to replace a hinged bar system, you can reduce your quad's weight by over 2 pounds and more importantly lower the quad's center of gravity.
Features: 300% reduction in vibration over anti-vibe stem alone Adjustable Spring Preload for personal preference Maintains the control and feel of a solid handlebar Maintains proper handlebar angle through the travel Bumps jar the bike not the bars Reduces arm-pump and rider fatigue
